Ⅰ、Brief introduction

　　Clinker bulk loader is an equipment that load clinkers( ≤ 50mm) automatically from stock house to the bulk truck or ship. It makes up of manual rod valve, motorized fan valve, hoisting unit, flexible outlet device, dust hose, capacitor limit switch and electric control system,

Ⅱ、Technical parameter table

Note:Change material to meet user’t material temperature and material granularity.

Ⅲ、Work principle

　　When transport tool is in loading position, open the rod number of rod valve. Push “down button” of control cabinet, outlet head will cut off the power of lifting motor automatically. Push “loading button”, it is in loading condition. The other auxiliary equipments will work at same time, too. The dust will be conveyed to purify in dust filter by flexible dust hose when discharging. When outlet head is filled, it will start to lift and alarm at the same time. The lifting distance is preset before loading material. If lifting distance is 1m, the time of time relay is setup T=1/V. Loading is still on during lifting. When outlet head is filled, operate the above again, until material is filled. Push stop button and make electromagnetic vibrator reverse brake, or close fan valve to stop working. After stopping, push “up button” to make outlet hopper away from material and ensure transport tool move and align with second loading position, until hopper is filled.

1、Sketch of clinker bulk loader of bottom silo (Drawing 1)

2、Sketch of bulk loader beside silo(Drawing 2)