Do you know the working characteristics and advantages and disadvantages of the air chute?

The air chute is a device for horizontally transporting dry powder materials. It is composed of several thin steel oil tanks connected to a certain inclination along its conveying direction. The air chute is mainly used for cement, fly ash, etc. Fluidized powder material, the storage tank uses a high-pressure centrifugal fan as the power source to fluidize the material in the closed conveying chute, so that the inclined end flows slowly, the high end of the conveying material is supplied to the upper shell, and the compressed air passes through the special The blower blows into the lower shell, and distributes between the material particles through the air-permeable layer with many gaps, so that the material is vaporized to change the friction angle of the material, form a flow state and descend along the slope, so as to achieve the purpose of conveying.

The air chute is a device that uses the air flow energy to make the granular material in a suspended state and conveys it along the pipeline with the air flow. There are three conveying modes: suction type, pressure feed type and mixed type. Air-permeable layer, convenient sealing operation and management, ZS linear vibrating screen equipment is light in weight, low in power consumption, large in conveying force, and easy to change conveying direction.

The main features of the air chute: 1. The conveying length is 0-500m, which can be divided and not affected by the curve; 2. The energy consumption is low, 60-80% less than the general GX, KS, etc.; 3. No mechanical moving parts, maintenance Very low cost, no noise and long life.

Talking about the advantages and disadvantages of air chute

The air chute is used for the horizontal transportation of dry powder materials such as cement and raw materials in cement enterprises. The device for conveying bulk materials by road, there are three types of suction type, pressure feeding type and mixing type, which are used for powder materials that are easy to fluidize such as cement and fly ash. The material in the conveying chute flows slowly in a fluidized state.

The air chute is composed of an upper water tank and a lower water tank. In the middle, a special wear-resistant chemical fiber fabric is used as a breathable layer to separate the upper and lower water tanks. The tank is installed with a certain inclination, the low-pressure air enters the lower tank, and after entering the upper tank through the breathable layer, the material in the upper tank is in a flowing shape, and the conveying purpose is achieved by gravity flow.

Today I want to talk to you about the advantages and disadvantages of air chute.

1. Advantages of air chute in practical application:

Since the air chute has no rotating parts in the material conveying process, compared with the belt conveyor and embedded scraper conveyor with the same function, it has the advantages of less wear, less power consumption, simple sealing, simple structure, safe operation, and simultaneous conveying direction. The advantages of changing and multi-point feeding and discharging materials are easy.

2. Disadvantages of air chute in practical application:

The material conveyed by the air chute is limited and can only be conveyed under a certain inclination, and cannot be conveyed upward.