Crushing Valves: Design Features of Cement Crushing Valves

The main function of the special crushing valve for cement plants is to crush the lumps formed by the water in the warehouse or warehouse in the material flow of the unloader. The blockage in the material cannot pass through the discharge port of the unloader, which will cause material blockage and cause the flow control valve to issue a false signal of false flow, which may affect the normal production of the process system, and may also cause a serious imbalance between raw materials and fuel due to false signals. , causing the combustion equipment temperature to be too high and equipment accidents to occur.

Crushing Valves: Design Features of Cement Crushing Valves

1. The production capacity of large machines can reach 1000 m3/h;

2. Suitable for various gasification chutes and storage outlets;

3. The design logistics temperature is as high as 120, and the energy consumption is low.

4. At 25 to 5, the power of the drive motor is only 1.1 kW (below B400) and 1.5 kW (above B500).

5. The crushing claw and grid plate are made of high wear-resistant materials; 6. Simple maintenance; 7. Integrated rotational speed detection device;

6. When the integrated speed detection device is selected, an electrical cabinet is randomly equipped.

Why buy a cement crushing valve

1. The premature coagulation of cement in the warehouse leads to a large amount of agglomeration on the warehouse wall, especially when the warehouse is low, the agglomeration of the warehouse wall falls off in a large area, which seriously affects the bulk transportation of cement.

2. A car can be filled up in 8-15 minutes in normal bulk, but it takes nearly 2 hours to fill up after the fake cement block, which often leads to an increase in the driver's complaint rate, which seriously affects the company's image and competitiveness.

3. The cement crushing valve can quickly deal with the agglomeration in the cement release online, meet the size requirements of the cement, quickly deal with the cement agglomeration, and improve the loading efficiency.

4. The crushing results of the cement crushing valve show that the cement release system is smoother, and the agglomeration is no longer cleaned manually, and the pollution of dust to the environment is also reduced.

Crushing valve: cement crushing valve

The crushing valve can be installed horizontally or vertically at the feeding end of the unloading equipment at the discharge outlet, such as the front part of the flow regulating valve or the pneumatic shut-off valve. When large pieces appear in the material, they can be broken up immediately to prevent blocking the passage of the discharge valve and ensure smooth discharge. The rotor of the crushing valve is equipped with radially arranged crushing claws that move the lumpy material through the grid and crush it.

The operation safety of the integrated block crushing valve is guaranteed by the motor speed detection device integrated in the electrical cabinet. When some block materials in the material cannot be broken and the rotor is stuck, the speed measuring device will alarm and automatically reverse, push the unbreakable block materials away and then rotate forward. When both the forward and reverse rotation are stuck, the special crusher for the cement plant will automatically shut down and wait for the fault to be eliminated before running. The tachometer is optional and needs to be specified in the equipment order.