Motorized Bending Chute

Motorized bending chute mainly use to convey bag package material that is conveyed from one belt to another turn belt that is vertical to it during transport. When working, open shocking arm and change material forward direction of bag material. Make it convey under the layer.

Technical capacity

1、Conveying material

Bagged cement: 50kg per bag

2、Cycloidal needle wheel reducer

（1）Type：BLY15-9-1.1

（2）Ratio：9

（3）Motor type：Y90S-4

Power：1.1kW，Speed：1410r/min

3、Motorized handspike

（1）Type：DT300-60-Ⅱ

（2）Thrust：300kg

（3）Speed：84mm/s

（4）Motor model：A06332

Power：0.55kW，Speed：2800r/min

Voltage：380V，Current：1.38A

4、Travel switch

（1）Type：JLXKI-111

（2）Voltage：380V

Current：5A

Technical request

1、The arrow in direction A view is expressed the direction of cement bag which B800 belt conveyor conveys to B650 belt truck bulk load through motorized bending cuote.

2、Cement bag should enter into motorized bending cuote by B800 belt conveyor in turn. Not allow transverse bag.

3、Travel switch is installed at site.

4、The connecting holes (26-φ12) between the connecting frame and the B800 belt conveyor frame shall be match-drilled on site during installation, and the corresponding idlers of the belt conveyor shall be removed.