Slide

Air slide is a pneumatic conveying equipment conveying dry and powder material widely. It is used to convey cement and raw material powder.

Compare with screw conveyor and belt conveyor, it is characterized by no driving part, easy maintenance, good sealing, no noise,safe and dependable operation, low power consumption and convenient to change conveying direction, It can feed and discharge with many points.

Air slide make up of groove body with common lamella steel plate and connect with the attachment with bolt. There is ventilated layer between upper and bottom groove body. Air slide are installed high to low at some angle from inlet to outlet. Material room is on the ventilated layer and air chamber is under the ventilated layer. When air with some pressure is sprayed in gas chamber, make material liquid through ventilated layer. Flow in groove body with the gravity. Wind source is blower. The rest air in material room is drawn out by outlet of air slide.

Working Principle

The air slide is composed of several trough bodies made of ordinary thin steel plate and other accessories connected by bolts. A ventilated layer is sandwiched between the upper and lower trough bodies. The air slide is installed at a certain inclined angle from the feed end to the discharge end, with the feed end higher than the discharge end.

The space above the ventilated layer is the material chamber, and the space below is the air chamber. When gas at a certain pressure is blown into the air chamber, it passes through the ventilated layer and fluidizes the material. As a result, the material flows in the trough body like a fluid under the action of gravity. A blower is generally used as the air source. The excess air in the material chamber is drawn out through the exhaust port of the air slide by a dust collector.

Arrangement type and structyre of air slide

Transport the ability reference form of air slide