Search

亚威机械

YAWEI MACHINE

1688   |   E-MAIL

Add:No.88, Fuqian Road, Baidian Industrial Zone, Hai’an, Jiangsu
Tel:86-513-88402039
Fax:86-513-88405118

Copyright © 2017 Nantong Yawei Machinery Manufacture Co., Ltd. -- All Rights Reserved.  编号:苏ICP备12075774号 Powered by www.300.cn

PRODUCTS

Nantong Yawei Machinery Manufacture Co., Ltd.

Products

Screw conveyor

Affiliate classification
Details

Ⅰ、Brief introduction

  Screw conveyor is continuous conveyor machinery without traction components. There is no additional driving part outside closed trough except drive unit. It has the advantages of simple structure, less land occupation, equipment easy to be sealed, convenient for multi-point feeding and discharging, easy operation and management. It’s normally used for conveying of powdery and granular material such as raw meal, pulverized coal powder, cement and slag in horizontal or less than 20 ° tilt direction. It can also be used as feeding machine or completing mixing operation during conveying period. 

Screw conveyor is with disadvantage of strong running resistance and with more power consumption compared with other conveyors,and with faster wearing on parts and large amount of maintenance. It’s not suitable for conveying of material with character of sticky and easy to agglomerate, granule nubbly, large wearing resistance, and temperature of conveyed material shall be lower than 200 ℃ . It is commonly used in occasions of small and medium sized conveying capacity with conveying distance less than 50m.

Screw conveyor commonly used can be divided into LS type (U shape groove type) and MLG (tube type) as per structure form and selection can be determined according to actual requirement.

Ⅱ、Screw conveyor structure diagram

Ⅲ、Representing method of screw conveyor specification

LS(MLG)nominal diameter×nominal length—screw type—drive method—bushing lining
 
Drive methods:C1 method—Single ended drive—C2 method—Double ended drive
 
Screw type:B1 method—Screw surface with entity, B2 method—Draper-type screw surface
 
Bushing lining:M1 method—middle suspension bearing with copper, antimony, tin alloy (babbit) bushing.M2 method—middle suspension bearing with wear resistance cast iron bushing.

Ⅳ、Parameter list of LS screw conveyor maximum conveying capacity

screw
diameter
(mm)
Pulverized coal powder
Cement
Raw material powder
maximum revolutions
of screw shaft n(r/min)
maximum conveying
capacity Q(t/h)
maximum revolutions
of screw shaft n(r/min)
maximum conveying
capacity Q(t/h)
maximum revolutions
of screw shaft n(r/min)
maximum conveying
capacity Q(t/h)
160
190
4.5
90
4.1
90
3.6
200
150
8.5
75
7.9
75
7.0
250
150
16.5
75
15.6
75
13.8
315
120
23.3
60
21.2
60
18.7
400
120
54.0
60
51.0
60
45
500
90
79.0
60
84.8
60
74.5
630
90
139.0
45
134.2
45
118

  Note: the rotation speed and conveying capacity of screw conveyor indicated in table are the maximum figure, and rotation number and actual conveying capacity shall be in line with requirement when model selection.

  Reference and determination of MLG tube screw conveyor capacity
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article