The cement bulk machine system is a special equipment for bulk cement. It connects the cement silo and the cement bulk transport tanker, and realizes the automatic loading of bulk cement through electrical control linkage. Then, let's take a look at the structural characteristics and working principle of the new bulk machine system. !

Bulk loader system is a new type of systematic cement bulk equipment, which can meet the car loading needs of cement or powder enterprises. Branch Pneumatic Conveyor Chutes, Spherical Rotary Joints, Bulk In order to achieve more discharge stations, in cases where more bulk machine units are required, the expansion of bulk machine units can be achieved by adding expandable distributors or expandable branch distributors. extension.

The main components of this new type of cement bulk machine are pneumatic conveying chute, roots blower that can provide a certain flow, "manual screw door", "branch" air discharge valve, discharge head and electrical control device, with ventilation layer, upper The upper part of the shell has a supply port, and there are at least two discharge ports on the side. There are guide plates between the supply port and each discharge port. The supply port is communicated with the conveying chute, and each discharge port is connected with the conveying chute.

After the transport tool enters the loading position, open the rocker valve and increase the corresponding number of rods. Press the "lowering button" on the control cabinet, after the unloading arrives, the power supply of the lowering motor is automatically turned off, and the "armored vehicle button" is pressed to enter the unloading state. The auxiliary equipment starts working accordingly. The dust generated by unloading passes through the lower hopper and enters the dust collector with a telescopic dust collecting hose for purification. When the lower feed material is full, the lower feed material will rise, and an alarm will be issued at the same time, and the rising distance is set before the input. Recharge is always performed during the ascent, but the above actions are repeated after the next recharge is full. After the recharge is full, press the stop button to make the electric vibrator stop in reverse, or close the fan valve to stop feeding. After parking, press the up button to keep the hopper away from the material for a certain distance, and only after ensuring the position of the transport tool can it be aligned with the second discharge station. After the trolley is full, it will automatically stop loading until the entire silo is full, the loading and unloading process is automated, the loading efficiency is high, and the dust pollution is less.

Using one main conveying chute of the bulk machine system can satisfy multi-point discharge and increase the input speed. The bulk machine system adopts a bulk unit modular system design, and its silo side bulk machine unit, gate valve and pneumatic conveying slideway can be used independently. The number of branch pneumatic conveying chutes and bulk units can be selected according to the needs. The options can be selected to meet the multi-station bulk requirements on the silo side, or the bulk machine can be directly selected to achieve the single-station recharge requirements for bulk bulk at the bottom of the silo.

The above is the structural characteristics and working principle of the new bulk machine system. If you want to know more, please feel free to contact us!