Experienced people in the crushed stone industry should know that a reasonable production line configuration generally conforms to two standards, which can make full use of the terrain advantages of the aggregate production site and save site and civil construction investment; proper equipment selection, production line efficiency and energy saving. So, how to reasonably arrange the production line of aggregate bulk machine, let's take a look!

1. Terrain layout

The production process of gravel generally includes the discharge supply stage, the crushing and screening stage at all levels, and the storage and sales stage of the finished product. When the customer configures these three stages, if the terrain on the site is undulating, it must take full advantage of the height difference to install the equipment. If the terrain is relatively flat, first choose a flat place as the discharge platform, and use the natural steps of the terrain to arrange the primary crushing equipment under the platform to reduce the amount of civil engineering. Arranged in a wide and flat place as a buffer

Second, the choice of aggregate bulk machine

Choosing a suitable aggregate bulk machine is an important part of the layout of the sand and gravel aggregate production line. The aspects to be considered are the properties of the material, the production scale, and the performance of the crushing equipment.

1. The nature of the material. Materials with high hardness wear relatively large equipment, and equipment crushed by extrusion principle needs to be used. Jaw crusher is usually the best choice; for medium or small hardness, hammer mill is usually selected. This is mainly because the material is crushed under the action of impact, and the finished material has a good grain shape and less needle pieces. In addition, under the same output conditions, it saves 30% of the electricity than the jaw crusher with a higher idling rate.

2. Production scale. Since there are many manufacturers of production equipment, there are multiple solutions for the same production project. Compared with customers, we recommend choosing economical solutions to reduce production costs.

3. The performance of crushing equipment. The new type hammer mill with high crushing ratio integrates crushing and shaping functions. One crushing can be used for two crushing, reducing the number of crushing stages; the products obtained by the crusher with rotational kinetic energy are mostly cubes; According to the principle of "stone", the obtained product has good grain shape, but the sand making efficiency is not as good as that of the vertical impact crusher that "beats stone and iron".

4. The particle shape and particle size of the product. The particle shape of the product refers to the geometric shape of the particles, and the particle size refers to the size of the particles. It is the main technical index to measure product quality regardless of product particle shape and granularity.

5. Mutual consistency of aggregate bulk machines. In order for the production line to run smoothly, it is necessary to make the production volume and model of each equipment consistent. It is recommended to choose a manufacturer that produces aggregate supporting production equipment. This can not only save the time and cost of purchasing equipment, but also obtain a reasonable configuration scheme.

The above is how to reasonably arrange the production line of aggregate bulk machine. If you want to know more, please feel free to contact us!