The aggregate bulk machine is equipped with a dust collection interface, through which the dust-laden gas is pumped into the dust collector for treatment and then discharged to realize the dust-free armored vehicle operation. The aggregate bulk machine is composed of manual lever valve, pneumatic arch valve, feeding device , telescopic bulk head, automatic positioning rope switch device, upper limit position device, electric lifting and winding device, automatic position tracking detector, special control cabinet, etc. The installation and maintenance are very convenient, and the process layout is also quite flexible. The aggregate bulk machine adopts the direct feeding method from the upper part, and the process layout is relatively simple. Let's learn about its working process together!

The working process of the aggregate bulk machine:

After the material enters the delivery position, the bulk machine presses the "drop" button of the control technology device, so that the bulk material head is lowered to the delivery port or the designated delivery position of the transport vehicle or ship. After reaching, the rope switch protection device automatically disconnects the lifting motor. The driving power supply has developed into a state of preparation for delivery, and has become the "in-feed" of the aggregate bulk machine. The dust-laden gas in the input mainly passes through the interlayer channel in the telescopic sleeve and is sucked and purified by the dust collector from the dust collection port and then discharged, which can be discharged by workers. On-site cleaning of aggregate bulk machines.

The design is that when the material is loaded into the enterprise with a certain angle of stacking problem affecting the continuation of the delivery, the automatic target position tracking level detector of the aggregate bulk machine sends a signal, and the electric hoisting device automatically raises the head of the material under the bulk. Continue to serve. Press the "Up" button again, the bulk material head is reset, and after reaching the upper limit position information specified by the aggregate bulk machine, the hoisting motor is automatically turned off from the limit mechanism as the power source. In armored vehicles and shipping transportation, when special circumstances need to stop loading, you can directly press the "stop" button of the aggregate bulk machine.

The above is the introduction of the working process of the aggregate bulk machine. Due to the different capability requirements of the open loading container and the closed loading container in terms of delivery and alarm functions, the detailed control study description must be based on the electric company of the aggregate bulk machine. The drawings shall prevail. The users of the aggregate bulk machine can continuously adjust the discharge amount within a certain range by selecting the opening of the manual rod valve at the same time. If you want to know more, please feel free to contact us!