Aggregate bulk machine structure:

The aggregate bulk loader consists of manual stem valve, pneumatic arc valve, feeding device, telescopic bulk head, automatic positioning loose rope switch device, upper limit device, electric lifting and winding device, automatic material level tracking detector and special electric control. Cabinets, etc. The aggregate bulk machine is very convenient to install and maintain, and the process layout is also quite flexible. The aggregate bulk machine adopts the direct feeding method from the top, and the process layout is relatively simple. The ash disperser is equipped with a dust collection interface, through which the dust-laden gas is pumped into the dust collector for treatment and then discharged, so as to realize the dust-free loading operation. The automatic tracking material level detector on the aggregate bulk machine can reliably control the electric winch to automatically lift the bulk discharge head according to the material accumulation, or automatically alarm and stop when the material is full.

The working process of the aggregate bulk machine:

When the material enters a loading position, the aggregate bulk loader presses the "down" button on the control technology device, so that the bulk unloading head is lowered to the feeding port of the vehicle or vessel or the designated loading position, and the rope is loosened after it is in place. The switch protection device can automatically disconnect the lift motor drive power supply and enter the state of preparing for loading, and then press the "loading" button of the aggregate bulk machine to directly load the product or ship the product. The dust-laden gas in the charging process is mainly pumped through the interlayer channel in the telescopic sleeve from the dust collection interface to the matching dust collector for purification and then discharged. The staff can realize dust-free operation on site. When the material is loaded to a certain accumulation problem angle of the enterprise and affects the continuous loading, the automatic target tracking material level detector of the aggregate bulk machine will send a signal to make the electric winch design automatically lift the bulk feeding head and continue to charge until the material Stop charging when full. Finally, press the "up" button to reset the bulk unloading head, and after reaching the predetermined upper limit position information of the aggregate bulk machine, the limit mechanism will automatically disconnect the hoisting motor as the power source. In the process of loading or shipping, if you need to stop loading in some special circumstances, you can directly press the "stop" button of the aggregate bulk machine. If you only need to call the police after the material is full, when the shutdown is operated by manual management, you can set the "automatic shutdown/manual shutdown" switch on the internal control production device to the "manual shutdown" position. Since the capacity requirements of the open loading container and the closed loading container are different in terms of charging and alarm functions, the detailed control study description is required to be subject to the electrical company instructions and drawings of the aggregate bulk machine. At the same time, the user of the aggregate bulk machine can continuously adjust the discharge amount within a certain range by selecting the opening degree of the manual rod valve.